 |
Share to:
4'' (3'') Wet Air Sander/Polisher (Water-Feed Type) (AT-686WL)
Features&Benefits
1.The Water-Feed installation favors your marble and stone finish work by water flow on the working area and does no harm to your body due to non-dust atmosphere at operation
2.Auxiliary handle can be mounted onto either side of tool body
3.Features side mounted water control knob and air regulating knob
4.This low speed tool does the sanding and polishing work by fitting sanding disc wet 4''-3'' in different grit from corse to fine
5.Great for laminating marble or stone table and trim work
6.Rear exhaust
1.The Water-Feed installation favors your marble and stone finish work by water flow on the working area and does no harm to your body due to non-dust atmosphere at operation
2.Auxiliary handle can be mounted onto either side of tool body
3.Features side mounted water control knob and air regulating knob
4.This low speed tool does the sanding and polishing work by fitting sanding disc wet 4''-3'' in different grit from corse to fine
5.Great for laminating marble or stone table and trim work
6.Rear exhaust
| Quantity: | |
|---|---|
-
AT-686WL
-
Hymair
-
8467190000
| FREE SPEED rpm | SPINDLE SIZE | BACKING PAD in. mm | AIR INLET (PT) | AIR HOSE (ID) | AVG.AIR CONSUMPTION SCFM | WORKING PRESSURE Psi Kg(Bar) | LENGTH x HEIGHT | WEIGHT Kgs/Lbs |
| 4,500 rpm | 5/8-11UNC or M14x2 | 4" 100 | 1/4" | 1/4" | 5 | 90 6.3 | 9.72''*3.86''/277*98mm | 1.32kgs |
| FREE SPEED rpm | SPINDLE SIZE | BACKING PAD in. mm | AIR INLET (PT) | AIR HOSE (ID) | AVG.AIR CONSUMPTION SCFM | WORKING PRESSURE Psi Kg(Bar) | LENGTH x HEIGHT | WEIGHT Kgs/Lbs |
| 4,500 rpm | 5/8-11UNC or M14x2 | 4" 100 | 1/4" | 1/4" | 5 | 90 6.3 | 9.72''*3.86''/277*98mm | 1.32kgs |